Discover the best UK online casinos with Greentube slots in 2026. Compare top Greentube casino sites, bonuses, and real-money play. read the best Greentube online casinos UK 2026 guide
ALL UNDER ONE ROOF
Comfort cooling and industrial ventilation are two different problems. An office needs zoning and quiet running. A production hall needs heat extraction, fresh air changes and ducting that does not fight the process equipment. A curing room needs humidity held within a few percent.
DOV handles system design, electrical connections, controls and automation, ducting, testing and commissioning on all three.
We provide air-conditioning systems for offices, hotels, commercial buildings, industrial facilities, food-processing environments and other specialised applications.
Each system is planned according to the required cooling capacity, indoor conditions, building layout, operating hours and future expansion requirements.
AHUs for offices, hotels, factories and production halls. We select coil capacity, fan static and filtration against the actual air change and load requirement of the space, then install the unit with its ducting and controls.
Zoned systems for buildings where each area runs on its own schedule. Rooms that are empty stop drawing power, which is where the running cost saving comes from over a central system.
Chiller-based air conditioning for large floor areas. Above a certain building size, chilled water beats DX on both running cost and serviceability, because the plant is in one place and the distribution is water rather than refrigerant.
Ventilation systems help introduce fresh air, remove heat, odours, fumes and contaminants, and maintain suitable indoor conditions.
We design ventilation solutions according to the building’s use, occupancy, process requirements, heat generation, air-change rates and safety considerations.
Fresh air units for production halls, clean areas and any space where air change rate matters as much as temperature. Filtered, conditioned outside air, delivered at the volume the process requires.
Cabinet fan exhaust for kitchens, process areas and fume extraction. Enclosed fan units run quieter and are easier to service than open axial installations.
Heat and fume extraction for factory floors, machine rooms and plant areas. Removing process heat at source costs a fraction of trying to cool the whole building afterwards.
Duct fabrication and installation. Badly designed ducting wastes fan power and makes rooms noisy, and it is the part most often value-engineered out of a job.
Certain industrial, commercial and processing environments require more than standard cooling.
DOV Engineering Services provides environmental-control solutions designed to maintain specific temperature, humidity and air-quality conditions.
These systems are suitable for facilities where environmental stability is important for product quality, process control, equipment protection or occupant safety.
Humidification for storage, curing, printing and packing areas where product dries out or generates static if moisture is too low.
Rooms built and controlled to a specified condition, holding both temperature and humidity inside a narrow band. Ripening, curing, testing and controlled storage.
Dehumidification for cold stores, warehouses and processing areas where moisture causes condensation on product, frost on evaporators or ice on floors. A dehumidifier is usually cheaper than repeatedly defrosting a plant that is fighting a humidity problem.
Filtration and air curtain solutions for hygiene sensitive production areas. Keeping contamination out of a processing hall is cheaper than dealing with a failed audit.